Elmomc SimplIQ Command Reference Manual do Utilizador descarregar pdf (Página 140)

RP[N] Range Definition

RP[4]: Level 1 Unlimited Level for positive slope trigger, or high side for

window trigger.

RP[5]: Level 2 Unlimited Level for negative slope trigger, or low side for

window trigger.

RP[6]: Polarity [0…63] Defines the polarity for the digital input trigger of

the recorder.

1: Positive polarity.

RP[7]: Digital

input mask

[0…63] Defines which digital inputs trigger the recorder.

Table 3-41: Trigger-related RP[N] Parameters

The following parameters enable the BH command to fetch only the required part of the

recorder results:

RP[N] Range Definition

RP[8]: Index low [0…1024] Lower buffer index for recorded data

transmission.

RP[9]: Index high [0…1024] Higher buffer index for recorded data trans-

mission. When RP[9]=RP[8]=0, all of the buffer is

transmitted.

Table 3-42: RP[N] Parameters Related to the BH command

Attributes: Type: Parameter, Integer

Source: Program, RS-232, CANopen

Restrictions: None

Default values: RP[1] is set by the UM command. The other

RP[N] values are defaulted to 0 at power on

Range: Defined in previous tables

Index range: [1…9]

Unit modes: All

Activation: Trigger parameters: RR=3

Upload parameters: Immediate

If the drive has stored a previously recorded data vector, setting RP[N] (with N

other than 8 or 9) will invalidate this data. Invalidated data cannot be retrieved.

Sem comentários

Elmomc SimplIQ Command Reference Manual do Utilizador Página 140